R3166-R3206-HP High-End Firewalls VPN Command Reference-6PW101

81
Use the undo tunnel flow-control command to disable the L2TP tunnel flow control function.
By default, the L2TP tunnel flow control function is disabled.
Examples
# Enable the L2TP tunnel flow control function.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel flow-control
tunnel name
Syntax
tunnel name name
undo tunnel name
View
L2TP group view
Default level
2: System level
Parameters
name: Name for the tunnel at the local end, a case sensitive string of 1 to 30 characters.
Description
Use the tunnel name command to specify the name of a tunnel at the local end.
Use the undo tunnel name command to restore the default.
By default, a tunnel takes the system name of the firewall as its name at the local end.
Related commands: sysname in Basic System Configuration Commands of the System Volume.
Examples
# Specify the local name for a tunnel as itsme.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel name itsme
tunnel password
Syntax
tunnel password { simple | cipher } password
undo tunnel password
View
L2TP group view
Default level
2: System level