R3166-R3206-HP High-End Firewalls VPN Configuration Guide-6PW101

96
L2TP configuration task list
Perform the tasks in Table 22 to configure L2TP on the LNS.
Table 22 L2TP configuration task list
Task Remarks
Enabling L2TP Required
Adding an L2TP group
Required
Create a L2TP group and configure L2TP group related parameters.
Displaying L2TP tunnel
information
Optional
View the L2TP tunnel information.
Enabling L2TP
Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as shown
in Figure 61. On the upper
part of the page, you can enable or disable L2TP.
Figure 61 L2TP configuration page
Table 23 Configuration item for enabling L2TP
Item Descri
p
tion
Enable L2TP Specify whether to enable L2TP globally.
Return to L2TP configuration task list.
Adding an L2TP group
Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as shown
in Figure 61. On the lo
wer part of the page, you can view and configure L2TP groups. Click Add to add
an L2TP group, as shown in Figure 62.