R3166-R3206-HP High-End Firewalls VPN Configuration Guide-6PW101

146
Configuring an entity DN
A certificate is the binding of a public key and the identity information of an entity, where the identity
information is identified by an entity distinguished name (DN). A CA identifies a certificate applicant
uniquely by entity DN.
An entity DN is defined by these parameters:
Common name of the entity.
Country code of the entity, a standard 2-character code. For example, CN represents China and US
represents the United States.
Fully qualified domain name (FQDN) of the entity, a unique identifier of an entity on the network.
It consists of a host name and a domain name and can be resolved to an IP address. For example,
www.whatever.com is an FQDN, where www is a host name and whatever.com a domain name.
IP address of the entity.
Locality where the entity resides.
Organization to which the entity belongs.
Unit of the entity in the organization.
State where the entity resides.
NOTE:
The configuration of an entity DN must comply with the CA certificate issue policy. You need to determine,
for example, which entity DN parameters are mandatory and which are optional. Otherwise, certificate
requests might be rejected.
Follow these steps to configure an entity DN:
To do… Use the command…
Remarks
Enter system view system-view
Create an entity and enter its
view
pki entity entity-name
Required
No entity exists by default.
Configure the common name
for the entity
common-name name
Optional
No common name is specified by default.
Configure the country code for
the entity
country country-code-str
Optional
No country code is specified by default.
Configure the FQDN for the
entity
fqdn name-str
Optional
No FQDN is specified by default.
Configure the IP address for
the entity
ip ip-address
Optional
No IP address is specified by default.
Configure the locality for the
entity
locality locality-name
Optional
No locality is specified by default.
Configure the organization
name for the entity
organization org-name
Optional
No organization is specified by default.
Configure the unit name for the
entity
organization-unit
org-unit-name
Optional
No unit is specified by default.