R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

8
Field Descri
p
tion
Forwarder Weight Track
Configuration
The weight track configuration of the VF. It is displayed only after the
execution of the vrrp vrid weight track command.
Track Object
Weight track entry. It is displayed only after the execution of the vrrp vrid
weight track command.
State
The state of a track entry includes
• Invalid
• Negative
• Positive
• Not existing
Weight Reduced
The weight value that is reduced when the status of the monitored track entry
turns to negative. It is displayed only after the execution of the vrrp vrid
weight track command.
display vrrp statistics
Syntax
display vrrp statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays VRRP group statistics of the specified interface.
interface-type interface-number specifies an interface by its type and number.
vrid virtual-router-id: Displays statistics of the specified VRRP group. virtual-router-id specifies a VRRP
group by its group number, which ranges from 1 to 255.
Description
Use the display vrrp statistics command to display statistics about VRRP group(s).
If you specify both an interface and a VRRP group, only the statistics about the specified VRRP group on
the interface are displayed; if you only specify an interface, the statistics about all the VRRP groups on the
interface are displayed; if you specify neither, the statistics about all the VRRP groups on the router are
displayed.
You can use the reset vrrp statistics command to clear the VRRP group statistics.
Related commands: reset vrrp statistics.
Examples
# When VRRP works in standard protocol mode, display the statistics about all VRRP groups.
<Sysname> display vrrp statistics
Interface : Ten-GigabitEthernet0/0.1
VRID : 1
CheckSum Errors : 0 Version Errors : 0
Invalid Type Pkts Rcvd : 0 Advertisement Interval Errors : 0