Manualshelf

R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
21222324252627282930
25
Default level
2: System level
Parameters
port-number: Destination port number of a test operation, which ranges from 1 to 65535.
Description
Use the destination port command to configure a destination port number for a test operation.
Use the undo destination port command to remove the configured destination port number.
By default, no destination port number is configured for a test operation.
Do not perform a UDP jitter test on ports from 1 to 1023 (known ports). Otherwise, the NQA test fails or
the corresponding services of this port are unavailable.
Examples
# Configure the destination port number of a test operation as 9000.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000
display nqa history
Syntax
display nqa history [ admin-name operation-tag ]
View
Any view
Default level
1: Monitor level
Parameters
admin-name operation-tag: Displays history records of an NQA test group. If these two arguments are
not specified, history records of all test groups are displayed. admin-name represents the name of the
NQA test group administrator who creates the NQA operation. It is a case-insensitive string of 1 to 32
characters. operation-tag represents the test operation tag. It is a case-insensitive string of 1 to 32
characters.
Description
Use the display nqa history command to display history records of the specified or all NQA test groups.
The display nqa history command cannot show you the results of UDP jitter tests. To know the result of a
UDP jitter test, use the display nqa result command to view the probe results of the latest NQA test, or use
the display nqa statistics command to view the statistics of NQA tests.
Examples
# Display the history records of the NQA test group in which the administrator name is administrator,
and the operation tag is test.
<Sysname> display nqa history administrator test
NQA entry (admin administrator, tag test) history record(s):
Index Response Status Time