R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

26
10 329 Succeeded 2007-04-29 20:54:26.5
9 344 Succeeded 2007-04-29 20:54:26.2
8 328 Succeeded 2007-04-29 20:54:25.8
7 328 Succeeded 2007-04-29 20:54:25.5
6 328 Succeeded 2007-04-29 20:54:25.1
5 328 Succeeded 2007-04-29 20:54:24.8
4 328 Succeeded 2007-04-29 20:54:24.5
3 328 Succeeded 2007-04-29 20:54:24.1
2 328 Succeeded 2007-04-29 20:54:23.8
1 328 Succeeded 2007-04-29 20:54:23.4
Table 6 Output description
Field Descri
p
tion
Index History record number
Response
Round-trip delay of a test packet in the case of a successful test, timeout time in the case of
timeout, or 0 in the case that a test cannot be completed (in milliseconds)
Status
Status value of test results, which can be one of the following values:
• Succeeded
• Unknown error
• Internal error
• Timeout
Time Time when the test is completed
display nqa result
Syntax
display nqa result [ admin-name operation-tag ]
View
Any view
Default level
1: Monitor level
Parameters
admin-name operation-tag: Displays results of the last test of a test group. If these two arguments are not
specified, results of the last tests of all test groups are displayed. admin-name represents the name of the
NQA test group administrator who creates the NQA operation. It is a case-insensitive string of 1 to 32
characters. operation-tag represents the test operation tag. It is a case-insensitive string of 1 to 32
characters.
Description
Use the display nqa result command to display results of the last NQA test.
Examples
# Display the results of the last UDP jitter test.
<Sysname> display nqa result admin test
NQA entry (admin admin, tag test) test results: