Manualshelf

R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
31323334353637383940
29
Field Descri
p
tion
Negative DS square sum
Square sum of negative delay jitters from destination to source
One way results Uni-direction delay test result, displayed in a UDP jitter test
Max SD delay Maximum delay from source to destination
Max DS delay Maximum delay from destination to source
Min SD delay Minimum delay from source to destination
Min DS delay Minimum delay from destination to source
Number of SD delay Number of delays from source to destination
Number of DS delay Number of delays from destination to source
Sum of SD delay Sum of delays from source to destination
Sum of DS delay Sum of delays from destination to source
Square sum of SD delay Square sum of delays from source to destination
Square sum of DS delay Square sum of delays from destination to source
SD lost packet(s)
Number of lost packets from the source to the destination
DS lost packet(s)
Number of lost packets from the destination to the source
Lost packet(s) for unknown reason
Number of lost packets for unknown reasons
display nqa statistics
Syntax
display nqa statistics [ admin-name operation-tag ]
View
Any view
Default level
1: Monitor level
Parameters
admin-name operation-tag: Displays statistics of the specified test group. If these two arguments are not
specified, statistics of all test groups are displayed. admin-name represents the name of the NQA test
group administrator who creates the NQA operation. It is a case-insensitive string of 1 to 32 characters.
operation-tag represents the test operation tag. It is a case-insensitive string of 1 to 32 characters.
Description
Use the display nqa statistics command to display statistics of test results for the specified or all test
groups.
Statistics cannot be generated until all probe operations in the first test of a test group have finished. If
they have not finished and you display statistics by using this command, the statistics will display as all
0s.
If a reaction entry is configured, the command displays the monitoring results of the reaction entry in the
period specified by the statistics internal command. If the threshold type is average value, the monitoring
results are invalid.