R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

42
Examples
# Configure the HTTP operation type as post.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] operation post
operation interface
Syntax
operation interface interface-type interface-number
undo operation interface
View
DHCP test type view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the operation interface command to specify the interface to perform a DHCP test. The specified
interface must be up; otherwise, no probe packets can be sent out.
Use the undo operation interface command to restore the default.
By default, no interface is specified to perform a DHCP test.
Examples
# Specify the interface to perform a DHCP test as Ten-GigabitEthernet 0/0.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] operation interface Ten-GigabitEthernet 0/0.1
password (FTP test type view)
Syntax
password password
undo password
View
FTP test type view
Default level
2: System level
Parameters
password: Password used to log in to the FTP server, which is a case sensitive string of 1 to 32 characters.