R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

44
If more than one probe operation is to be performed in a test, the system starts a second probe operation
when it receives responses to packets sent in the first probe operation, or when the probe timeout time
expires.
Examples
# Configure the ICMP test group to perform 10 probe operations per test.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Syaname-nqa-admin-test-icmp-echo] probe count 10
probe packet-interval
Syntax
probe packet-interval packet-interval
undo probe packet-interval
View
UDP jitter test type view
Default level
2: System level
Parameters
packet-interval: Interval for sending packets per probe operation, which ranges from 10 to 60000
milliseconds.
Description
Use the probe packet-interval command to configure the interval for sending packets per probe
operation.
Use the undo probe-interval command to restore the default.
By default, the interval is 20 milliseconds.
Examples
# Configure the UDP jitter test group to send packets at an interval of 100 milliseconds during each
probe operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-interval 100
probe packet-number
Syntax
probe packet-number packet-number
undo probe packet-number
View
UDP jitter test type view