R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

45
Default level
2: System level
Parameters
packet-number: Number of packets to be sent per probe operation. It ranges from 10 to 1000 for each
probe operation in one UDP jitter test.
Description
Use the probe packet-number command to configure the number of packets to be sent per probe during
one UDP jitter test.
Use the undo probe packet-number command to restore the default.
By default, the number of packets to be sent per probe is 10 in one UDP jitter test.
Examples
# Configure the UDP jitter test group to send 100 packets per probe.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-number 100
probe packet-timeout
Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
View
UDP jitter test type view
Default level
2: System level
Parameters
packet-timeout: Timeout time for waiting for responses in a UDP jitter test, which ranges from 10 to
3600000 milliseconds.
Description
Use the probe packet-timeout command to configure the timeout time for waiting for a response in a UDP
jitter test.
Use the undo probe packet-timeout command to restore the default.
By default, the timeout time in a UDP jitter test is 3000 milliseconds respectively.
Examples
# Configure the timeout time for waiting for a response in a UDP jitter test as 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-timeout 100