R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

46
probe timeout
Syntax
probe timeout timeout
undo probe timeout
View
DHCP, DNS, DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo test type view
Default level
2: System level
Parameters
timeout: Timeout time for a probe operation, in milliseconds. The value ranges from 10 to 86400000 for
an FTP or HTTP probe operation, and from 10 to 3600000 for a DHCP, DNS, DLSw, ICMP echo, SNMP,
TCP or UDP echo probe operation.
Description
Use the probe timeout command to configure the timeout time for a probe operation. When a probe
operation does not complete within the period, the probe operation is timed out.
Use the undo probe timeout command to restore the default.
By default, the timeout time is 3000 milliseconds for a probe operation.
This command is not supported by UDP jitter tests.
Examples
# Configure the timeout time for a DHCP probe operation as 10000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Syaname-nqa-admin-test-dhcp] probe timeout 10000
reaction checked-element probe-fail
Syntax
reaction item-number checked-element probe-fail threshold-type consecutive consecutive-occurrences
[ action-type { none | trigger-only } ]
undo reaction item-number
View
DHCP, DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo test type view
Default level
2: System level
Parameters
item-number: ID for a reaction entry, which ranges from 1 to 10.
threshold-type: Specifies a threshold type.