R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

48
Description
Use the reaction trap command to configure to send traps to network management server under
specified conditions.
Use the undo reaction trap command to restore the default.
By default, no traps are sent to the network management server.
Examples
# Configure the system to send a trap if consecutive probe failures in an ICMP echo test is greater than
or equal to 5.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] reaction trap probe-failure 5
resolve-target
Syntax
resolve-target domain-name
undo resolve-target
View
DNS test type view
Default level
2: System level
Parameters
domain-name: Specifies the domain name to be resolved. It is a case insensitive string separated by dots
(.), each part consisting of 1 to 63 characters. The total length must be within 255 characters, Valid
characters in a part include letters, digits, hyphens (-), and underscores (_).
Description
Use the resolve-target command to set the domain name for a DNS test.
Use the undo resolve-target command to restore the default.
By default, no domain name is configured.
Examples
# Set the domain name for DNS resolution to domain1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dns
[Syaname-nqa-admin-test-dns] resolve-target domain1
route-option bypass-route
Syntax
route-option bypass-route
undo route-option bypass-route