R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

51
View
SNMP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
port-number: Source port number of probe packets, which ranges from 1 to 50000.
Description
Use the source port command to configure the source port of probe packets.
Use the undo source port command to remove the configured port number.
By default, no source port number is configured.
Examples
# Configure port 8000 as the source port of probe packets in the UDP echo test group.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] source port 8000
statistics hold-time
Syntax
statistics hold-time hold-time
undo statistics hold-time
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
hold-time: Hold time of a statistics group in minutes, which ranges from 1 to 1440.
Description
Use the statistics hold-time command to configure the hold time of statistics groups for a test group. A
statistics group is deleted when its hold time expires.
Use the undo statistics hold-time command to restore the default.
By default, the hold time of a statistics group is 120 minutes.
This command is not supported by DHCP tests.
Examples
# Configure the hold time of a statistics group as 3 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3