R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

52
statistics max-group
Syntax
statistics max-group number
undo statistics max-group
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
number: Maximum number of statistics groups that can be kept, which ranges from 0 to 100. To disable
collecting statistics, specify number 0.
Description
Use the statistics max-group command to configure the maximum number of statistics groups that can be
kept.
Use the undo statistics max-group command to restore the default.
By default, 2 statistics groups at most can be kept.
When the number of statistics groups kept reaches the upper limit and a new statistics group is to be
saved, the earliest statistics group is deleted.
This command is not supported by DHCP tests.
Examples
# Configure the NQA to save up to 5 statistics groups for the ICMP test group.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics max-group 5
statistics interval
Syntax
statistics interval interval
undo statistics interval
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
interval: Interval in minutes for collecting statistics of the test results for a test group, which ranges from 1
to 35791394.