R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

53
Description
Use the statistics interval command to configure the interval for collecting test result statistics for a test
group.
Use the undo statistics interval command to restore the default.
By default, the interval is 60 minutes.
NQA groups tests completed in the specified interval, and calculates the test result statistics. The statistics
form a statistics group. To view information about the statistics groups, use the display nqa statistics
command.
This command is not supported by DHCP tests.
Examples
# Configure the interval for collecting the test result statistics of an ICMP test group as 2 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics interval 2
tos
Syntax
tos value
undo tos
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
value: Value of the ToS field in the IP header in an NQA probe packet, which ranges from 0 to 255.
Description
Use the tos command to configure the value of the ToS field in the IP header in an NQA probe packet.
Use the undo tos command to restore the default.
By default, the ToS field in the IP header of an NQA probe packet is 0.
Examples
# Configure the ToS field in an IP packet header in an NQA probe packet as 1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] tos 1