R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

57
<Sysname> display nqa server status
nqa server is: enabled
tcp-connect:
IP Address Port Status
2.2.2.2 2000 active
udp-echo:
IP Address Port Status
3.3.3.3 3000 inactive
Table 10 Output description
Field Descri
p
tion
tcp-connect NQA server status in the NQA TCP test
udp-echo NQA server status in the NQA UDP test
IP Address IP address specified for the TCP/UDP listening service on the NQA server
Port Port number of the TCP/UDP listening service on the NQA server
Status
Listening service status.
• active: Listening service is ready.
• inactive: Listening service is not ready.
nqa server enable
Syntax
nqa server enable
undo nqa server enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the nqa server enable command to enable the NQA server.
Use the undo nqa server enable command to disable the NQA server.
By default, the NQA server is disabled.
Related commands: nqa server tcp-connect, nqa server udp-echo, and display nqa server status.
Examples
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable