R3204P16-HP Load Balancing Module High Availability Command Reference-6PW101

59
port-number: Port number specified for the UDP listening service on the NQA server, which ranges from
1 to 50000.
Description
Use the nqa server udp-echo command to create a UDP listening service on the NQA server.
Use the undo nqa server udp-echo command to remove the UDP listening service created.
Configure the command on the NQA server for UDP jitter, and UDP echo tests only.
The IP address and port number must be consistent with those configured on the NQA client and must be
different from those of an existing listening service.
The IP address must be that of an interface on the NQA server. Otherwise, the configuration becomes
invalid.
Related commands: nqa server enable and display nqa server status.
Examples
# Create a UDP listening service by using the IP address 169.254.10.2 and port 9000.
<Sysname> system-view
[Sysname] nqa server udp-echo 169.254.10.2 9000