R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

19
• Type 1 in the VRID box.
• Type 202.38.160.111 in the Virtual IP box and then click Add to add the virtual IP address to the
Virtual IP Members box.
• Click Apply.
# Configure VRRP group attributes.
• On the VRRP group page of Ten-GigabitEthernet 0/0.1, click the icon corresponding to VRRP
group 1 to enter the page shown in Figure 14.
Figure 14 Configure VRRP group attri
butes
• Type 11 0 in the Priority box.
• Select Preemptive from the Preempt Mode box.
• Type 5 in the Delay box.
• Select Simple from the Authentication box.
• Type hello in the Key box.
• Type 5 in the Advertise Time box.
• Click Display Track Config.