R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

20
• Select Ten-GigabitEthernet0/0.2 from the Interface box, type 30 in the Reduced Priority box, and
then click Add to add the interface to the list box of tracked interface.
• Click Apply.
3. Configure LB B
# Configure the IP address of each interface and the zones. The configuration is omitted here.
# Create VRRP group 1 on Ten-GigabitEthernet 0/0.1 and configure the virtual IP address as
2 0 2. 3 8 .16 0 .111.
• Select High Availability > VRRP from the navigation tree to enter the VRRP interfaces page. Click the
icon corresponding to Ten-GigabitEthernet 0/0.1, and click Add to enter the page shown
in Figure 15.
Figure 15 Create VRRP
group 1
• Type 1 in the VRID box.
• Type 202.38.160.111 in the Virtual IP box and click Add to add the virtual IP address to the Virtual
IP Members box.
• Click Apply.
# Configure VRRP group attributes.
• On the VRRP group page of Ten-GigabitEthernet 0/0.1, click the icon corresponding to VRRP
group 1 to enter the page shown in Figure 16.