R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

23
Figure 19 Create VRRP group 2
• Type 2 in the VRID box.
• Type 202.38.160.112 in the Virtual IP box and click Add to add the virtual IP address to the Virtual
IP Members box.
• Click Apply.
# Set the priority of LB A in VRRP group 1 to 11 0 .
• On the VRRP group page of Ten-GigabitEthernet 0/0.1, click the icon corresponding to VRRP
group 1 to enter the page shown in Figure 20.
Figure 20 Set th
e priority of LB A in VRRP group 1
• Type 11 0 in the Priority box.
• Click Apply.
3. Configure LB B
The web interfaces for configuring LB B are similar to those for configuring LB A. The configuration
procedure is omitted here.
# Configure the IP address of each interface and the zones. (Omitted)
# Create VRRP group 1 on Ten-GigabitEthernet 0/0.1 and configure the virtual IP address as
2 0 2 . 3 8 .16 0 .111.