R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

24
• Select High Availability > VRRP from the navigation tree to enter the VRRP interfaces page. Click the
icon corresponding to Ten-GigabitEthernet 0/0.1, and click Add.
• Type 1 in the VRID box.
• Type 202.38.160.111 in the Virtual IP box and click Add to add the virtual IP address to the Virtual
IP Members box.
• Click Apply.
# Create VRRP group 2 on Ten-GigabitEthernet 0/0.1 and configure the virtual IP address as
2 0 2 . 3 8 .16 0 .112.
• On the VRRP group page of Ten-GigabitEthernet 0/0.1, click Add.
• Type 2 in the VRID box.
• Type 202.38.160.112 in the Virtual IP box and click Add to add the virtual IP address to the Virtual
IP Members box.
• Click Apply.
# Set the priority of LB B in VRRP group 2 to 11 0 .
• Click the icon corresponding to VRRP group 2 on the VRRP group page of Ten-GigabitEthernet
0/0.1.
• Type 11 0 in the Priority box.
• Click Apply.
4. Verify the configuration
After the configuration, the VRRP group information on Ten-GigabitEthernet 0/0.1 respectively on LB A
and LB B shows that:
• In VRRP group 1, LB A is the master while LB B is the backup. Hosts on 202.38.160.111/24 access
the Internet through LB A.
• In VRRP group 2, LB A is the backup while LB B is the master. Hosts on 202.38.160.112 /24 ac c ess
the Internet through LB B.
Configuring VRRP in the command line interface
VRRP configuration task list
Task Remarks
Configuring the association between virtual
IP address and MAC address
Optional
When VRRP works in the load balancing mode, the association
between the virtual IP address and the MAC address can be
configured but is not effective.
Configuring VRRP working mode Optional
Specifying the VRRP control VLAN Optional
Creating VRRP group and configuring virtual
IP address
Required
Configuring router priority, preemptive mode
and tracking function
Optional