R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

Run Method : Virtual MAC

Total number of virtual routers : 1

Interface Ten-GigabitEthernet0/0.1

VRID : 1 Adver Timer : 1

Admin Status : Up State : Backup

Config Pri : 100 Running Pri : 100

Preempt Mode : Yes Delay Time : 5

Auth Type : None

Virtual IP : 10.1.1.1

Master IP : 10.1.1.2

Forwarder Information: 3 Forwarders 1 Active

Config Weight : 255

Running Weight : 255

Forwarder 01

State : Listening

Virtual MAC : 000f-e2ff-0011 (Learnt)

Owner ID : 0000-5e01-1101

Priority : 127

Active : 10.1.1.2

Forwarder 02

State : Listening

Virtual MAC : 000f-e2ff-0012 (Learnt)

Owner ID : 0000-5e01-1103

Priority : 127

Active : 10.1.1.3

Forwarder 03

State : Active

Virtual MAC : 000f-e2ff-0013 (Owner)

Owner ID : 0000-5e01-1105

Priority : 255

Active : local

The output shows that in VRRP group 1, LB A is the master and LB B and LB C are the backups. On each

of the three LBs, there are one AVF and two LVFs acting as the backups.

# If LB A fails, use the display vrrp verbose command to display the detailed information of VRRP group

1 on LB C.

[LBC-Ten-GigabitEthernet0/0.1] display vrrp verbose

IPv4 Standby Information:

Run Mode : Load Balance