R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

Configuring the collaboration function

Collaboration is implemented by establishing reaction entries to monitor the detection results of a test

group. If the number of consecutive probe failures reaches the threshold, the configured action is

triggered.

Follow these steps to configure the collaboration function:

To do… Use the command…

Remarks

Enter system view system-view —

Enter NQA test group view nqa entry admin-name operation-tag —

Enter test type view of the test

group

type { dhcp | dlsw | dns | ftp | http |

icmp-echo | snmp | tcp | udp-echo }

The collaboration function is not

supported in UDP jitter tests.

Configure a reaction entry

reaction item-number checked-element

probe-fail threshold-type consecutive

consecutive-occurrences [ action-type

{ none | trigger-only } ]

Required

Not configured by default.

You cannot modify the content of

an existing reaction entry.

Exit to system view quit —

Configure a track entry and

associate it with the reaction

entry of the NQA test group

track entry-number nqa entry

admin-name operation-tag reaction

item-number

Required

Not created by default.

You cannot modify the content of

an existing reaction entry.

Configuring threshold monitoring

Configuration prerequisites

Before you configure threshold monitoring, complete the following tasks:

• Configure the destination address of the trap message by using the snmp-agent target-host

command.

• Create an NQA test group and configure related parameters.