R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

66
To do… Use the command… Remarks
Configure to send traps to the
network management server under
specified conditions
reaction trap { probe-failure
consecutive-probe-failures | test-complete |
test-failure cumulate-probe-failures }
Required
Configure to send
traps.
No traps are sent to
the network
management server
by default.
NOTE:
NQA DNS tests do not support the action of sending trap messages. The action to be triggered in DNS
tests can only be the default one, none.
Configuring the NQA statistics collection function
NQA groups tests completed in a time period for a test group, and calculates the test result statistics. The
statistics form a statistics group. To view information about the statistics groups, use the display nqa
statistics command. To set the interval for collecting statistics, use the statistics interval command.
When the number of statistics groups kept reaches the upper limit and a new statistics group is to be
saved, the oldest statistics group is deleted. To set the maximum number of statistics groups that can be
kept, use the statistics max-group command.
A statistics group is formed after the last test is completed within the specified interval. Statistics groups
have an aging mechanism. A statistics group is deleted when its hold time expires. To set the hold time
of statistics groups for a test group, use the statistics hold-time command.
Follow these steps to configure the NQA statistics collection function:
To do… Use the command…
Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Enter test type view of the test
group
type { dlsw | dns | ftp | http
| icmp-echo | snmp | tcp |
udp-echo | udp-jitter }
—
Configure the interval for collecting
the statistics of test results
statistics interval interval
Optional
60 minutes by default.
Configure the maximum number of
statistics groups that can be kept
statistics max-group number
Optional
2 by default.
To disable collecting NQA statistics, set
the maximum number to 0.
Configure the hold time of statistics
groups
statistics hold-time hold-time
Optional
120 minutes by default.