R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

68
To do… Use the command… Remarks
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Enter test type view of a test
group
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo | udp-jitter }
—
Configure the description
for a test group
description text
Optional
By default, no description is available for a
test group.
Configure the interval
between two consecutive
tests for a test group
frequency interval
Optional
By default, the interval between two
consecutive tests for a test group is 0
milliseconds. Only one test is performed.
If the last test is not completed when the
interval specified by the frequency
command is reached, a new test does not
start.
Configure the number of
probe operations to be
performed in one test
probe count times
Optional
By default, one probe operation is
performed in one test.
Configure the NQA probe
timeout time
probe timeout timeout
Optional
By default, the timeout time is 3000
milliseconds.
Not available for UDP jitter tests.
Configure the maximum
number of hops a probe
packet traverses in the
network
ttl value
Optional
20 by default.
Not available for DHCP tests.
Configure the ToS field in
an IP packet header in an
NQA probe packet
tos value
Optional
0 by default.
Not available for DHCP tests.
Enable the routing table
bypass function
route-option bypass-route
Optional
Disabled by default.
Not available for DHCP tests.
Configuring a schedule for an NQA test group
You can configure a schedule for an NQA test group by setting the start time and test duration for a test
group.
A test group performs tests between the scheduled start time and the end time (the start time plus test
duration). If the scheduled start time is ahead of the system time, the test group starts testing immediately.
If both the scheduled start and end time are behind the system time, no test will start. To view the current
system time, use the display clock command.