R3204P16-HP Load Balancing Module High Availability Configuration Guide-6PW101

77
# Enable the NQA server and configure a listening service to listen to IP address 10.2.2.2 and UDP port
9000.
<Device> system-view
[Device] nqa server enable
[Device] nqa server udp-echo 10.2.2.2 9000
2. Configure LB
# Create a UDP jitter test group.
<LB> system-view
[LB] nqa entry admin test
[LB-nqa-admin-test] type udp-jitter
# Configure UDP jitter packets to use 10.2.2.2 as the destination IP address and port 9000 as the
destination port.
[LB-nqa-admin-test-udp-jitter] destination ip 10.2.2.2
[LB-nqa-admin-test-udp-jitter] destination port 9000
# Configure the device to perform UDP jitter tests at an interval of 1000 milliseconds.
[LB-nqa-admin-test-udp-jitter] frequency 1000
[LB-nqa-admin-test-udp-jitter] quit
# Start UDP jitter tests.
[LB] nqa schedule admin test start-time now lifetime forever
# Stop UDP jitter tests after a period of time.
[LB] undo nqa schedule admin test
# Display the result of the last UDP jitter test.
[LB] display nqa result admin test
NQA entry (admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average round trip time: 15/32/17
Square-Sum of round trip time: 3235
Last succeeded probe time: 2008-05-29 13:56:17.6
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
UDP-jitter results:
RTT number: 10
Min positive SD: 4 Min positive DS: 1
Max positive SD: 21 Max positive DS: 28
Positive SD number: 5 Positive DS number: 4
Positive SD sum: 52 Positive DS sum: 38
Positive SD average: 10 Positive DS average: 10
Positive SD square sum: 754 Positive DS square sum: 460