R3204P16-HP Load Balancing Module Load Balancing Configuration Guide-6PW101

14
Figure 14 Modify real service
• To enable slow-offline of a real service, select the Enable Slow-Offline option, and then click Apply.
After slow-offline is enabled, you can view the server load balancing statistics, and then remove the
corresponding server or network device from the cluster after the original services of the real service
are processed. After slow-offline is enabled, the status LED of the real service changes from to
.
• To stop assigning traffic to a real service, select the Stop Service option, and click Apply.
NOTE:
If you select both the Enable Slow-Offline and Stop Service options for a real service, the LB device
immediately stops assigning traffic to the real service, but the slow-offline function does not take effect.
Return to Server load balancing configuration task list.
Creating a virtual service
Select Load Balance > Server Load Balance from the navigation tree, and then click Virtual Service to
enter the page as shown in Figure 15. C
lick Add to enter the virtual service configuration page, as shown
in Figure 16.