R3204P16-HP Load Balancing Module Load Balancing Configuration Guide-6PW101

21
• Type the real service group name HTTPGroup.
• Select the algorithm Weighted Round Robin.
• Select the health monitoring type ICMP.
• Select the troubleshooting method Keep Connected.
• Click Apply.
# Create real service ServerA for Server A.
• Click the Real Service tab, and click Add to perform the following configurations, as shown in Figure
22.
Figure 22 Create a real
service
• Type the real service name ServerA.
• Type the IP address of the real service 192.168.1.1.
• Type the port number 8080.
• Type the weight 150.
• Select the real service group HTTPGroup.
• Click Apply.
# Create real service ServerB for Server B.
• Click Add on the Real Service tab page to perform the following configurations, as shown in Figure
22.
• T
ype the real service name ServerB.
• Type the IP address of the real service 192.168.1.2.
• Type the port number 8080.
• Type the weight 120.
• Select the real service group HTTPGroup.
• Click Apply.
# Create real service ServerC for Server C.
• Click Add on the Real Service tab page to perform the following configurations, as shown in Figure
22.
• T
ype the real service name ServerC.