R3204P16-HP Load Balancing Module Load Balancing Configuration Guide-6PW101

22
• Type the IP address of the real service 192.168.1.3.
• Type the port number 8080.
• Type the weight 100.
• Select the real service group HTTPGroup.
• Click Apply.
# Create virtual service VS.
• Click Virtual Service, and click Add to perform the following configurations, as shown in Figure 23.
Figure 23 Create virtual service VS
• Type the virtual service name VS.
• Type the IP address of the virtual service 61.159. 4 .10 0 .
• Select the mask 32 (255.255.255.255).
• Select the protocol type TCP.
• Type the port number 80.
• Select the forwarding mode NAT.
• Select the real service group HTTPGroup.
• Select the Enable Virtual Service check box.
• Click Apply.
Configuration verification
After the server runs normally for a period of time, you can display the statistics to verify the configuration
of load balancing.