R3204P16-HP Load Balancing Module Load Balancing Configuration Guide-6PW101

25
Figure 27 Create a real service group
• Type the real service group name FirewallGroup.
• Select the algorithm Destination IP Hashing.
• Select the health monitoring type ICMP.
• Select the troubleshooting method Redirection.
• Click Apply.
# Create real service FirewallA for Firewall A on LB device A.
• Click the Real Service tab, and click Add to perform the following configuration, as shown in Figure
28.
Figure 28 Create a real
service
• Type the real service name FirewallA.
• Type the IP address of the real service 10 . 0 .1.1 .
• Select the real service group FirewallGroup.
• Click Apply.
# Create real service FirewallB for Firewall B.