R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

98
Field Descri
p
tion
Reject
The packets matching a Reject route will be dropped. Besides, the
router sends ICMP unreachable messages to the sources of the
dropped packets. The Reject routes are usually used for network
testing.
Static
A static route is not lost when you perform the save operation and
then restart the router. Routes configured manually are marked as
static.
Unicast Unicast routes
Inactive Inactive routes
Invalid Invalid routes
WaitQ The route is the WaitQ during route recursion.
TunE Tunnel
GotQ The route is in the GotQ during route recursion.
Age
Time for which the route has been in the routing table, in the sequence of hour, minute,
and second from left to right.
Tag Route tag
display ip routing-table acl
Syntax
display ip routing-table acl acl-number [ verbose ]
View
Any view
Default level
1: Monitor level
Parameters
acl-number: Basic ACL number, in the range of 2000 to 2999.
verbose: Displays detailed routing table information, including that for inactive routes. With this
argument absent, the command displays only brief information about active routes.
Description
Use the display ip routing-table acl command to display information about routes permitted by a
specified basic ACL.
This command is intended for the follow-up display of routing policies.
NOTE:
If the specified ACL does not exist or it has no rules configured, the entire routing table is displayed.
Examples
# Define basic ACL 2000 and set the route filtering rules.
<Sysname> system-view