R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

103
Parameters
ip-prefix-name: IP prefix list name, a string of 1 to 19 characters.
verbose: Displays detailed routing table information, including that for inactive routes. With this
argument absent, the command displays only brief information about active routes.
Description
Use the display ip routing-table ip-prefix command to display information about routes permitted by a
specified prefix list.
This command is usually used together with routing policy display commands. If the specified prefix list
is not configured, detailed information about all routes (with the verbose keyword) or brief information
about all active routes (without the verbose keyword) is displayed.
Examples
# Configure a prefix list named test, permitting routes with a prefix of 2.2.2.0 and a mask length between
24 and 32.
<Sysname> system-view
[Sysname] ip ip-prefix test permit 2.2.2.0 24 less-equal 32
# Display brief information about active routes permitted by the prefix list test.
[Sysname] display ip routing-table ip-prefix test
Routes Matched by Prefix list : test
Summary Count : 2
Destination/Mask Proto Pre Cost NextHop Interface
2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2
2.2.2.1/32 Direct 0 0 127.0.0.1 InLoop0
For description of the output, see Table 24.
# Display detailed information about both active and inactive routes permitted by IP prefix list test.
[Sysname] display ip routing-table ip-prefix test verbose
Routes Matched by Prefix list test :
Summary Count : 2
Destination: 2.2.2.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 2.2.2.1 Interface: Vlan-interface2
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 1d00h20m52s
Tag: 0
Destination: 2.2.2.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d00h20m52s
Tag: 0