R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

25
Last clearing of counters: Never
Last 300 seconds input: 0 bytes/sec, 0 packets/sec
Last 300 seconds output: 0 bytes/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
For the display interface null command output description, see Table 5.
interface loopback
Syntax
interface loopback interface-number
undo interface loopback interface-number
View
System view
Default level
2: System level
Parameters
interface-number: Loopback interface number, ranging from 0 to 1023.
Description
Use the interface loopback command to create a loopback interface or enter loopback interface view.
Use the undo interface loopback command to remove a loopback interface.
Related commands: display interface loopback.
Examples
# Create interface loopback 5.
<Sysname> system-view
[Sysname] interface loopback 5
[Sysname-LoopBack5]
interface null
Syntax
interface null 0
View
System view
Default level
2: System level
Parameters
0: Specifies interface Null 0. The null interface number is fixed to 0.
Description
Use the interface null command to enter null interface view.