R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

31
Examples
# Display brief IP configuration information for Ten-GigabitEthernet interfaces.
<Sysname> display ip interface brief Ten-GigabitEthernet
*down: administratively down
(s): spoofing
Interface Physical Protocol IP Address Description
Ten-GigabitEthernet0/0 up up 192.168.20.144 Ten-Gigab...
Ten-GigabitEthernet0/0.1 down down unassigned Ten-Gigab...
Table 7 Output description
Field Descri
p
tion
*down: administratively
down
The interface is administratively shut down with the shutdown command.
(s) : spoofing
Spoofing attribute of the interface. It indicates that an interface whose link layer
protocol is displayed up may have no link present or the link is set up only on
demand.
Interface Interface name.
Physical
Physical state of the interface:
• *down—The interface is shut down with the shutdown command.
• Down—The interface is administratively up but its physical state is down,
which may be caused by a connection or link failure.
• Up—The administrative and physical states of the interface are up.
Protocol
Link layer protocol state of the interface:
• Down—The protocol state of the interface is down, which is usually because
that no IP address is assigned to the interface.
• Up—The protocol state of the interface is up.
• Up(s)—The protocol state of the interface is up (spoofing).
IP Address
IP address of the interface (If no IP address is configured, unassigned is
displayed.)
Description
Interface description information, for which at most 12 characters can be
displayed. If there are more that 12 characters, only the first nine characters are
displayed.
ip address
Syntax
ip address ip-address { mask-length | mask } [ sub ]
undo ip address [ ip-address { mask-length | mask } [ sub ] ]
View
Interface view
Default level
2: System level
Parameters
ip-address: IP address of interface, in dotted decimal notation.