R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

46
Field Descri
p
tion
Last clearing of counters
The time when the reset counts interface vlan-interface command was
last used to clear the interface statistics.
Never indicates the reset counters interface command has never been
used on the interface since the device’s startup.
Last 300 seconds input: 0 bytes/sec,
0 bits/sec, 0 packets/sec
Last 300 seconds output: 0
bytes/sec , 0 bits/sec, 0 packets/sec
Average rate of input packets and output packets in the last 300
seconds (in bps and pps).
0 packets input, 0 bytes, 0 drops
Total number and size (in bytes) of the received packets of the interface
and the number of the dropped packets.
0 packets output, 0 bytes, 0 drops
Total number and size (in bytes) of the transmitted packets of the
interface and the number of the dropped packets.
display vlan
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
View
Any view
Default level
1: Monitor level
Parameters
vlan-id1: Displays information about a VLAN specified by VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays information about a range of VLANs specified by a VLAN ID range.
all: Displays all VLAN information except for the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID of each dynamic VLAN. Dynamic VLANs
refer to VLANs that are generated through GVRP or those distributed by a RADIUS server.
reserved: Displays information about the reserved VLANs. Protocol modules determine which VLANs are
reserved VLANs according to function implementation, and reserved VLANs serve protocol modules.
You cannot do any configuration on reserved VLANs.
static: Displays the number of static VLANs and the ID of each static VLAN. Static VLANs are VLANs
manually created.
Description
Use the display vlan command to display VLAN information.
Related commands: vlan.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN Type: static