R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

47
Route interface: not configured
Description: VLAN 0002
Name: VLAN 0002
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
Ten-GigabitEthernet0/1
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN Type: static
Route Interface: configured
IP Address: 1.1.1.1
Subnet Mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged Ports: none
Untagged Ports: none
Table 12 Output description
Field Description
VLAN Type VLAN type (static or dynamic).
Route interface Indicates whether a VLAN interface is configured or not.
Description Description of the VLAN.
Name Name configured for the VLAN.
Broadcast MAX-ratio
Broadcast traffic threshold (available only on the LB modules supporting the
broadcast-suppression command).
IP Address
Primary IP address of the VLAN interface (available only on a VLAN interface
configured with an IP address). To display secondary IP addresses. use the
display interface vlan-interface command in any view or the display this
command in VLAN interface view.
Subnet Mask
Subnet mask of the primary IP address (available only on a VLAN interface
configured with an IP address).
Tagged Ports Ports through which packets of the VLAN are sent tagged.
Untagged Ports Ports through which packets of the VLAN are sent untagged.
interface vlan-interface
Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
View
System view