R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

52
Parameters
hybrid: Displays hybrid ports.
trunk: Displays trunk ports.
Description
Use the display port command to display information about the hybrid or trunk ports on the LB module,
including the port names, PVIDs, and allowed VLAN IDs.
Examples
# Display information about the hybrid ports in the system.
<Sysname> display port hybrid
Interface PVID VLAN passing
XGE0/0.1 100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
# Display information about the trunk ports in the system.
<Sysname> display port trunk
Interface PVID VLAN passing
XGE0/0.2 2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Table 13 Output description
Field Description
Interface Port name.
PVID Port VLAN ID.
VLAN passing VLANs for which the port allows packets to pass through.
Tagged VLANs for which the port sends packets without removing VLAN tags.
Untagged VLANs for which the port sends packets after removing VLAN tags.
port
Syntax
port interface-list
undo port interface-list
View
VLAN view
Default level
2: System level
Parameters
interface-list: Specifies an Ethernet port list, in the format of interface-list = { interface-type
interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10> indicates that you can
specify up to 10 ports or port ranges.