R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

1
Interface configuration commands
General Ethernet interface and subinterface
configuration commands
combo enable
Syntax
combo enable { copper | fiber }
View
Ethernet interface view (combo interface)
Default level
2: System level
Parameters
copper: Activates the copper combo port.
fiber: Activates the fiber combo port.
Description
Use the combo enable command to activate the copper or fiber combo port.
By default, the copper combo port is activated.
Combo interfaces are logical interfaces. A combo interface comprises one fiber (optical) port and one
copper (electrical) port. The two ports cannot work simultaneously. If one port is enabled, the other port
is automatically disabled.
Examples
# Activate the copper combo port of combo interface GigabitEthernet 0/3.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/3
[Sysname-GigabitEthernet0/3] combo enable copper
# Activate the fiber combo port of combo interface GigabitEthernet 0/4.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/4
[Sysname-GigabitEthernet0/4] combo enable fiber
description
Syntax
description text
undo description