R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

59
Description: VLAN 0003
Name: VLAN 0003
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
Ten-GigabitEthernet0/0.2
VLAN ID: 4
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: not configured
Description: VLAN 0004
Name: VLAN 0004
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
Ten-GigabitEthernet0/0.3
Table 14 Output description
Field Descri
p
tion
VLAN Type VLAN type, static or dynamic.
Isolate-user-VLAN type VLAN type, isolate-user-VLAN or secondary VLAN.
Route Interface Indicates whether a VLAN interface is configured for the VLAN.
IP Address
IP address of the VLAN interface, if configured. This field is not displayed
if no IP address is configured for the VLAN interface.
Subnet Mask
Subnet mask of the VLAN interface, if configured. This field is not
displayed if no mask is configured for the VLAN interface.
Description VLAN description.
Name VLAN name.
Tagged Ports Ports through which packets of this VLAN are sent tagged.
Untagged Ports Ports through which packets of this VLAN are sent untagged.
isolate-user-vlan
Syntax
isolate-user-vlan isolate-user-vlan-id secondary secondary-vlan-id [ to secondary-vlan-id ]
undo isolate-user-vlan isolate-user-vlan-id [ secondary secondary-vlan-id [ to secondary-vlan-id ] ]
View
System view
Default level
2: System level
Parameters
isolate-user-vlan-id: Specifies an isolate-user-VLAN ID, ranging from 1 to 4094.