R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

64
Related commands: reset arp, display arp.
Examples
# Configure a static ARP entry, with the IP address being 202.38.10.2, the MAC address being
00e0-fc01-0000, and the outbound interface being Ten-GigabitEthernet 0/0.1 of VLAN 10.
<Sysname> system-view
[Sysname] arp static 202.38.10.2 00e0-fc01-0000 10 Ten-GigabitEthernet0/0.1
arp timer aging
Syntax
arp timer aging aging-time
undo arp timer aging
View
System view
Default level
2: System level
Parameters
aging-time: Age timer for dynamic ARP entries in minutes, in the range 1 to 1,440.
Description
Use the arp timer aging command to set the age timer for dynamic ARP entries.
Use the undo arp timer aging command to restore the default.
By default, the age timer for dynamic ARP entries is 20 minutes.
Related commands: display arp timer aging.
Examples
# Set the age timer for dynamic ARP entries to 10 minutes.
<Sysname> system-view
[Sysname] arp timer aging 10
display arp
Syntax
display arp [ [ all | dynamic | static ] | vlan vlan-id | interface interface-type interface-number ]
[ [ verbose ] [ | { begin | exclude | include } regular-expression ] | count ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.