R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

66
display arp ip-address
Syntax
display arp ip-address [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: Displays the ARP entry for the specified IP address.
|: Uses a regular expression to specify the ARP entries to be displayed. For more information about
regular expressions, see System Management Configuration Guide.
begin: Displays the ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries that contain the specified string.
regular-expression: A case-sensitive string for matching, consisting of 1 to 256 characters.
Description
Use the display arp ip-address command to display the ARP entry for a specified IP address.
Related commands: arp static, reset arp.
Examples
# Display the corresponding ARP entry for the IP address 20.1.1.1.
<Sysname> display arp 20.1.1.1
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
20.1.1.1 00e0-fc00-0001 N/A N/A N/A S
display arp timer aging
Syntax
display arp timer aging
View
Any view
Default level
2: System level
Parameters
None
Description
Use the display arp timer aging command to display the age timer for dynamic ARP entries.
Related commands: arp timer aging.