R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

67
Examples
# Display the age timer for dynamic ARP entries.
<Sysname> display arp timer aging
Current ARP aging time is 10 minute(s)
naturemask-arp enable
Syntax
naturemask-arp enable
undo naturemask-arp enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the naturemask-arp enable command to enable natural mask support for ARP requests.
Use the undo naturemask-arp enable command to restore the default.
By default, natural mask support for ARP requests is disabled.
Examples
# Enable natural mask support for ARP requests.
<Sysname> system-view
[Sysname] naturemask-arp enable
reset arp
Syntax
reset arp { all | dynamic | static | interface interface-type interface-number }
View
User view
Default level
2: System level
Parameters
all: Clears all ARP entries except authorized ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
interface interface-type interface-number: Clears the ARP entries for the interface specified by the
interface-type interface-number argument.