R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

74
View
VLAN interface view, Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the proxy-arp enable command to enable proxy ARP.
Use the undo proxy-arp enable command to disable proxy ARP.
By default, proxy ARP is disabled.
Related commands: display proxy-arp.
Examples
# Enable proxy ARP on Ten-GigabitEthernet 0/0.1.
<Sysname> system-view
[Sysname] interface Ten-GigabitEthernet 0/0.1
[Sysname-Ten-GigabitEthernet0/0.1] proxy-arp enable