R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

View

Any view

Default level

1: Monitor level

Parameters

None

Description

Use the display nat all command to display all NAT configuration information.

Examples

# Display all NAT configuration information.

<Sysname> display nat all

NAT address-group information:

There are currently 1 nat address-group(s)

1 : from 202.110.10.10 to 202.110.10.15

NAT bound information:

There are currently 1 nat bound rule(s)

Interface: Ten-GigabitEthernet0/0.1

Direction: outbound ACL: 2009 Address-group: 1 NO-PAT: N

NAT server in private network information:

There are currently 1 internal server(s)

Interface: Ten-GigabitEthernet0/0.2, Protocol: 6(tcp)

Global: 5.5.5.5 : 80(www)

Local : 192.1.1.1 : 80(www)

NAT static information:

There are currently 1 NAT static configuration(s)

single static:

Local-IP : 1.1.1.1

Global-IP : 2.2.2.2

Local-VPN : ---

NAT static enabled information:

Interface Direction

Ten-GigabitEthernet0/0.4 out-static

NAT aging-time value information:

tcp ---- aging-time value is 86400 (seconds)

udp ---- aging-time value is 300 (seconds)

icmp ---- aging-time value is 60 (seconds)

pptp ---- aging-time value is 86400 (seconds)

dns ---- aging-time value is 60 (seconds)

tcp-fin ---- aging-time value is 60 (seconds)