R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

80
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display nat dns-map command to display NAT DNS mapping configuration information.
Related commands: nat dns-map.
Examples
# Display NAT DNS mapping configuration information.
<Sysname> display nat dns-map
NAT DNS mapping information:
There are currently 2 NAT DNS mapping(s)
Domain-name: www.server.com
Global-IP : 202.113.16.117
Global-port: 80(www)
Protocol : 6(tcp)
Domain-name: ftp.server.com
Global-IP : 202.113.16.100
Global-port: 21(ftp)
Protocol : 6(tcp)
Table 19 Output description
Field Descri
p
tion
NAT DNS mapping information NAT DNS mapping information
There are currently 2 DNS mapping(s) There are two DNS mapping entries
Domain-name Domain name of the internal server
Global-IP Public IP address of the internal server
Global-port Public port number of the internal server
Protocol Protocol type of the internal server
display nat server
Syntax
display nat server
View
Any view
Default level
1: Monitor level