R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

81
Parameters
None
Description
Use the display nat server command to display information about internal servers.
Related commands: nat server.
Examples
# Display information about internal servers.
<Sysname> display nat server
NAT server in private network information:
There are currently 2 internal server(s)
Interface: Vlan-interface10, Protocol: 6(tcp)
Global: 100.100.120.120 : 21(ftp)
Local : 192.168.100.100 : 21(ftp)
Status:Inactive
Interface: Vlan-interface11, Protocol: 6(tcp)
Global: 100.100.100.121 : 80(www)
Local : 192.168.100.101 : 80(www) vpn2
Status:Active
# Display information about internal servers.
<Sysname> display nat server
NAT server in private network information:
There are currently 2 internal server(s)
Interface: Ten-GigabitEthernet0/0.1, Protocol: 6(tcp)
Global: 10.1.1.3 : 80(www)
Local : 9.9.9.9 : 80(www)
Interface: Ten-GigabitEthernet0/0.2, Protocol: 6(tcp)
Global: 10.1.1.1 : 21(ftp)
Local : (server-group 1) vpn2
2.2.2.2 : 21(ftp) (Connections: 0)
2.2.2.5 : 21(ftp) (Connections: 1)
2.2.2.6 : 21(ftp) (Connections: 0)
Table 20 Output description
Field Descri
p
tion
Server in private network
information
Information about internal servers
Interface Internal server interface
Protocol Protocol type
Global
Public IP address and port number of a server, and the name of the VPN
instance that the public address belongs to.