R3204P16-HP Load Balancing Module Network Management Command Reference-6PW101

4
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
NULL0 UP UP(s) --
XGE0/0 UP DOWN --
XGE0/0.11 UP UP 11.0.0.2
When you use the begin keyword to filter the output, the system only searches the Layer 3 or Layer 2
interface list. If regular-expression is on the Layer 3 interface list, the system only displays the line that
contains regular-expression, and all subsequent lines on the Layer 3 interface list.
# Display brief information about all UP interfaces.
<Sysname> display brief interface | include UP
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
GE0/1 UP UP 192.168.0.1
GE0/1.1 UP DOWN --
NULL0 UP UP(s) --
XGE0/0 UP DOWN --
XGE0/0.11 UP UP 11.0.0.2
# Display the brief information about all but Ethernet interfaces.
<Sysname> display brief interface | exclude Eth
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
GE0/1 UP UP 192.168.0.1
GE0/1.1 UP DOWN --
GE0/2 DOWN DOWN --
GE0/3 DOWN DOWN 172.16.28.222 to_GL
GE0/4 DOWN DOWN --
NULL0 UP UP(s) --
XGE0/0 UP DOWN --
XGE0/0.11 UP UP 11.0.0.2
Table 1 Output description
Field Descri
p
tion
The brief information of
interface(s) under route
mode:
The command displays brief information about Layer 3 interfaces.
Link: ADM -
administratively down;
Stby - standby
ADM—The interface has been shut down by the network administrator. To
recover its physical layer state, perform the undo shutdown command.
Stby—The interface is a standby interface. You can use the display standby state
command to check the corresponding primary interface.