R3204P16-HP Load Balancing Module Security Command Reference-6PW101

111
Related commands: key, radius scheme, and state.
Examples
# Specify the secondary authentication/authorization server for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary authentication 10.110.1.2 1812
security-policy-server
Syntax
security-policy-server ip-address
undo security-policy-server { ip-address | all }
View
RADIUS scheme view
Default level
2: System level
Parameters
ip-address: IP address of the security policy server.
all: Specifies all security policy servers.
Description
Use the security-policy-server command to specify a security policy server.
Use the undo security-policy-server command to remove one or all security policy servers.
By default, no security policy server is specified.
You can specify up to eight security policy servers for a RADIUS scheme.
You can use the commands to change the setting only when no user is using the RADIUS scheme.
Related commands: radius nas-ip.
Examples
# For RADIUS scheme radius1, set the IP address of a security policy server to 10.110.1.2.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] security-policy-server 10.110.1.2
server-type
Syntax
server-type { extended | standard }
undo server-type
View
RADIUS scheme view