R3204P16-HP Load Balancing Module Security Command Reference-6PW101

7
Field Descri
p
tion
Status
Whether ACL acceleration is using up to date criteria for rule matching:
• UTD—The ACL criteria are up to date and have not changed since ACL acceleration
was enabled.
• OOD—The ACL criteria are out of date. This state is displayed, if you have modified
the ACL after ACL acceleration was enabled. ACL acceleration matches packets still
against the old criteria. To ensure correct packet matching, disable and re-enable ACL
acceleration.
display time-range
Syntax
display time-range { time-range-name | all }
View
Any view
Default level
1: Monitor level
Parameters
time-range-name: Specifies a time range name, which is a case insensitive string of 1 to 32 characters.
It must start with an English letter.
all: Displays the configuration and status of all existing time ranges.
Description
Use the display time-range command to display the configuration and status of the specified time range
or all time ranges.
Examples
# Display the configuration and status of time range t4.
<Sysname> display time-range t4
Current time is 17:12:34 4/13/2010 Tuesday
Time-range : t4 ( Inactive )
from 00:00 1/1/2010 to 23:59 1/31/2010
Table 3 Output description
Field Descri
p
tion
Current time Current system time
Time-range
Configuration and status of the time range, including its name,
status (active or inactive), and start time and end time.
reset acl counter
Syntax
reset acl counter { acl-number | all | name acl-name }