R3204P16-HP Load Balancing Module Security Command Reference-6PW101

131
The connection limit rules in a policy are matched in ascending order of rule ID. Take the match order into
consideration when assigning the rules IDs. HP recommends you arrange the rule by limit granularity
and limit range in ascending order.
Related commands: connection-limit policy and display connection-limit policy.
Examples
# Configure connection limit rule 1 for policy 1 to limit the maximum number of TCP connections sourced
f r o m 1.1.1.1.
<Sysname> system-view
[Sysname] connection-limit policy 0
[Sysname-connection-limit-policy-0] limit 1 source ip 1.1.1.1 32 protocol tcp
max-connections 200
# Configure connection limit rule 2 to limit the maximum number of UDP connections destined to 2.2.2.2.
[Sysname-connection-limit-policy-0] limit 2 destination ip 2.2.2.2 32 protocol udp
max-connections 200
# Configure connection limit rule 3 to limit the maximum number of IP connections sourced from each
h o s t on t h e s e g me n t 1.1.1.0 / 24 .
[Sysname-connection-limit-policy-0] limit 3 source ip 1.1.1.0 24 protocol ip
max-connections 200 per-source
# Configure connection limit rule 4 to limit the maximum number of IP connections destined to each host
on the segment 2.2.2.0/24.
[Sysname-connection-limit-policy-0] limit 4 destination ip 2.2.2.0 24 protocol ip
max-connections 200 per-destination